Ante solid rubber i water: a liquid adhesive. Bonding at room temperature to achieve the strongest effect within seconds. For the repair of all materials, such as wood, rubber, paper, plastic, metal, fiberglass, ceramics, glass, leather and marble, but polyethylene, polypropylene, polyacetal, soft PVC, EPDM, thermal plastic elastomer, are subject to the primer, can be used. 
 How to use: 
 1, adhesive surface should be clean, dry and without grease. 
 2, tighten the lid that came with the piercing nozzle. 
 3, using the nozzle out, be careful to prevent glue spills. 
 4, the adhesive applied to one surface of a square inch, just a drop. 
 5, immediately to the surface you want to patch a little to put pressure 10 seconds or wait until the fully bonded. 
 6, excess viscose stick a finger or nozzle with a tissue to erase. 
 7, away from children. 

 Instant glue with additional information: bleaching, instant glue mist causes instant glue evaporates into the air before curing, bonding the workpiece around the sticky part hardened into a fine powder and attached to the surface of the object; available dry cloth to carefully wipe or wipe with alcohol and other (solvent would affect the material need to be confirmed). 
 Prevention of white mist method: 
 ◆ Clear adhesive surface and the surrounding dust, moisture, grease. 
 ◆ lower temperature. 
 ◆ bonding surface glue exposed to control the amount of adhesive 
 ◆ In order not to glue the steam retention, sizing environment required ventilation 
 ◆ increase the sizing of ambient air humidity 
 ◆ Use the hardening accelerator 8022 and 8062 
 ◆ the use of polypropylene gloves jobs 
 ◆ Japan Ante solid adhesives the Alteco ADHESIVES: 
 Instant glue: D Z125 88 Z106 the CN2 CN4 CN6 Key Cap for Z27 Z28s Z84 the Z84X E135 (Cyan) EZ100 EZ150 EZ1500 EZ20 EZ3 EZ500 EZ800 
 T-10 T-100 T-600 Z180-1 Z180-2 M MR MX13 EE V2 E50.